4literacies.org

If you have experienced partially blank pages or blank spots on printed pages after you have replaced Phaser toner, there are several things to troubleshoot on your own before calling in a repairman or investing in a new machine. A few steps can mean the different between a minor repair at the office and an expensive repair call. You can also read solid ink resources to help you learn more. These solid ink resources have proven to be effective for learning.

First off, try replacing the ream of paper if you experience blank spots after replacing your Phaser 6180 toner. If you have a ream of paper with inconsistencies or bent spots, it can impact your print quality. Make sure you have a fresh, undamaged ream and try again.

Next, if you are still having problems, make sure that the paper you are using is within the recommended specifications set out by the manufacturer to coordinate with your Phaser 6180 toner printer. Read the instruction manual and make sure the paper is of the correct size. Buying paper from the manufacturer can also eliminate problems.

If the paper is not an issue, try removing and re-installing the transfer unit. Unplug your machine from the wall, read the manual thoroughly, and follow the instructions to remove and re-install the transfer unit. You can also follow the same steps to remove and re-install the fuser, which could also be the source of problems with the blank spots in the prints.

Another problem that could be giving your prints a spotting appearance is condensation. This buildup can be a rare but major problem. The solution is simple. Simply avoid using the printer for an hour after it starts up. This should rid the printer of condensation naturally and eliminate the possibility of problems when printing.

Finally, make sure you are using the correct toner brand. An off-brand or remanufactured cartridge can give you bad results. When in doubt, use the manufacturer’s cartridge for best results.